PCBVerified.com — Trusted PCB manufacturers globally
For manufacturersSign in

PCB manufacturer directory

Compare published manufacturing capabilities
Combined capability requires factory confirmation
Active filters:None applied127 manufacturers610 matching profiles
Compare selected (0)
Compare capabilitiesCompare (0)
Manufacturer & regionCapability envelopeLayers | Line / space | Hole | ImpedanceRFQ
————

Shown for 26-layer TU-872SLK depth-routed stepped-slot PCB · manufacturer-published

Individual mechanically stepped construction, not a generic highlayer or hardgold qualification.

Haiying ElectronicsSichuan, ChinaView factory profile Profile: Multilayer PCB — mass-production column
Up to 12 layers3.94 / 3.94 mil——

Shown for Multilayer PCB — mass-production column · manufacturer-published

Explicit Mass Production column, separate from Prototype and additional processing table. Pictured FR-4 board does not define the numeric envelope.

————

Shown for 12 oz thick-copper PCB example · manufacturer-published

12oz catalogue label; layer count, thickness definition and thermal limits unconfirmed.

6 layers2.56 / 2.56 mil——

Shown for Six-layer blind/buried-via FR-4 board · manufacturer-published

Individually researched official example. General process-table limits are not assigned to this construction.

8 layers3 / 3 mil——

Shown for Eight-layer industrial robot HDI PCB · manufacturer-published

Individual catalogue example with its bound original photo. No hole size/material inferred. Production combination and reliability require released drawings.

————

Shown for 4-layer wearable rigid-flex — S04C24336 · manufacturer-published

Individual rigid-flex construction, not the separate FPC process envelope. NFPP not expanded. Source format is not assigned to a pictured individual unit. No bend-life inference.

GainbaseGuangdong, ChinaView factory profile Profile: Single-sided to 24-layer PCB manufacturing
1–24 layers1.97 / 1.97 mil0.15 mm hole—

Shown for Single-sided to 24-layer PCB manufacturing · manufacturer-published

Conventional board range. The finished mechanical-hole value is used for filtering; laser holes and HDI require separate construction review. Thickness range shown applies to double-sided boards.

—1.18 / 1.18 mil——

Shown for HDI PCB — mSAP process · manufacturer-published

mSAP-specific 30/30μm line/space, separate from tenting 40/40μm and from pictured HDI panel. Generic microvia definition is not finished-hole capability.

4 layers———

Shown for Four-layer automotive centre-control PCB · manufacturer-published

Specific automotive catalogue example dated 2022-04-15; not a current factory-wide process limit.

6 layers3.94 / 3.94 mil——

Shown for Elevator-controller PCB — 6 layers, fluorescent solder mask · manufacturer-published

Individual official catalogue example; numeric hole label is not classified as finished aperture. See the factory page for construction-specific interpretation.

How should I read the evidence?

UL ownership, equipment and material traceability are reviewed separately. Open each record for its source, scope and review date. Reviewed documents do not guarantee a particular board design or production outcome.

Do matching limits guarantee my board is manufacturable?

No. Layer, trace, drill and impedance values must match within one capability profile, but the combination still requires a factory DFM review. A dash means the value was not published and does not satisfy a numeric filter.