PCB manufacturer directory
Compare published manufacturing capabilities| Manufacturer & region | Capability envelopeLayers | Line / space | Hole | Impedance | RFQ | |
|---|---|---|---|
![]() Welgao ElectronicsJi’an, Jiangxi, ChinaView factory profile 3 matching profiles Profile: Welgao optical-module PCB example
| ———— Shown for Welgao optical-module PCB example · manufacturer-published Photographed PCB example, not an assembled optical module or a measured data-rate claim. Published optical-process figures remain separate from this image. | ||
![]() Aoshikang TechnologyHunan / Guangdong, ChinaView factory profile 1 matching profile Profile: Multilayer PCB — technical-support envelope | Up to 24 layers——±8% impedance Shown for Multilayer PCB — technical-support envelope · manufacturer-published Technical-support table says 24L while another heading says 24+. Only the explicit table limit is used; no lower layer bound is assumed. | ||
![]() Shanghai Fast-PCBShanghai, ChinaView factory profile 4 matching profiles Profile: RF/M-Wave service — stack and material approval
| 2–26 layers——— Shown for RF/M-Wave service — stack and material approval · manufacturer-published General service columns not exact photographed RF construction. Hole definitions and unresolved 120oz copper label not normalized. | ||
![]() Hitech CircuitsShenzhen, Guangdong, ChinaView factory profile 4 matching profiles Profile: Rigid PCB — mechanical finished-hole profile | 1–38 layers2.95 / 2.95 mil0.15 mm hole±10% impedance Shown for Rigid PCB — mechanical finished-hole profile · manufacturer-published Rigid PCB table. Mechanical finished-hole value only; the separate 0.1 mm laser value is excluded. | ||
![]() Victory PCBShenzhen, Guangdong, ChinaView factory profile 4 matching profiles Profile: Four-layer via-in-pad — 8/8mil and ±10% impedance | 4 layers8 / 8 mil—±10% impedance Shown for Four-layer via-in-pad — 8/8mil and ±10% impedance · manufacturer-published Specific product; source unit and copper conflicts explicitly retained. No finished aperture inferred. | ||
4 / 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 layers3 / 3 mil—±10% impedance Shown for FR-4 multilayer — 1 oz outer copper · manufacturer-published One-ounce outer-copper condition. Half-ounce inner-layer minima are not used as an outer-layer promise. Even controlled-impedance layer choices only. | |||
![]() PCBWayShenzhen, Guangdong, ChinaView factory profile 4 matching profiles Profile: Standard PCB fabrication
| 1–14 layers3.94 / 3.94 mil0.15 mm hole— Shown for Standard PCB fabrication · manufacturer-published Standard PCB table only. Advanced processing and specialty laminate limits require a separate review. | ||
![]() JLCPCBShenzhen, Guangdong, ChinaView factory profile 4 matching profiles Profile: Two-layer RF PCB — Rogers or named PTFE grades
| 2 layers3.94 / 3.94 mil—— Shown for Two-layer RF PCB — Rogers or named PTFE grades · manufacturer-published Service-family process condition; original official table. Promotional family artwork not qualified sample. Hole/drill values are not finished apertures. | ||
CEE TechnologyHuizhou, Guangdong, ChinaView factory profile 4 matching profiles Profile: 6-layer sports-watch rigid-flex PCB
| 6 layers2.95 / 2.95 mil—— Shown for 6-layer sports-watch rigid-flex PCB · manufacturer-published Named rigid-flex catalogue construction; original Chinese values. Hole descriptions do not define finished plated apertures. | ||
![]() Olympic Circuit TechnologyHeshan, Guangdong, ChinaView factory profile 1 matching profile Profile: Automotive multilayer PCB
| ———— Shown for Automotive multilayer PCB · manufacturer-published Company-level product portfolio; no numerical parameters are inferred from application labels. |
How should I read the evidence?
UL ownership, equipment and material traceability are reviewed separately. Open each record for its source, scope and review date. Reviewed documents do not guarantee a particular board design or production outcome.
Do matching limits guarantee my board is manufacturable?
No. Layer, trace, drill and impedance values must match within one capability profile, but the combination still requires a factory DFM review. A dash means the value was not published and does not satisfy a numeric filter.








