PCBVerified.com — Trusted PCB manufacturers globally
For manufacturersSign in

PCB manufacturer directory

Compare published manufacturing capabilities
Combined capability requires factory confirmation
Active filters:None applied127 manufacturers610 matching profiles
Compare selected (0)
Compare capabilitiesCompare (0)
Manufacturer & regionCapability envelopeLayers | Line / space | Hole | ImpedanceRFQ
6 layers3 / 3 mil——

Shown for Six-layer half-hole home-control module · manufacturer-published

Individual official catalogue construction; no finished-hole or product-specific impedance tolerance assigned. General processing limits remain separate.

————

Shown for Other-application board · JSY-006 · manufacturer-published

Application-tab identifier and corresponding original bare-board photograph; no numerical dimensions, laminate, layer count or combined limits inferred from images or filenames.

Hongtai ElectronicsGuangdong, ChinaView factory profile
1 matching profile
Profile: PCB — published production capability
—3.5 / 3.5 mil0.15 mm hole—

Shown for PCB — published production capability · manufacturer-published

Production column only. The 6.3 mm thickness, 0.075 mm routing and 0.10 mm finished-hole limit column is excluded.

Mingxingda ElectronicsHunan, ChinaView factory profile Profile: Rigid PCB manufacturing — 1 to 12 layers
1–12 layers3.94 / 3.94 mil——

Shown for Rigid PCB manufacturing — 1 to 12 layers · manufacturer-published

Panel limits vary by construction. The source describes a drilled 0.20 mm hole, not an unambiguous finished-hole guarantee.

12 layers———

Shown for 12-layer blind/buried-via coil PCB · manufacturer-published

Specific manufacturer catalogue construction; hole labels are not established finished-hole minima and general chart limits are not assigned to this board.

4 layers6 / 8 mil——

Shown for Four-layer PTFE / FR-4 hybrid PCB · manufacturer-published

Parameters belong to this individual manufacturer catalogue example. Hole basis and laminate grades are unspecified; no confirmed finished-hole or material-brand match is entered.

4 layers4.92 / — mil——

Shown for 4SOG64000258A · four-layer impedance board · manufacturer-published

Model-specific manufacturer catalogue. Product hole wording does not define finished-hole size; mask bridge is not trace spacing. No numeric impedance tolerance is assigned.

20 layers———

Shown for A008 twenty-layer immersion-gold PCB · manufacturer-published

Values belong to this named catalogue example. General manufacturing limits are shown separately in the factory profile; agree the complete construction before production.

16 layers3.94 / 4.72 mil——

Shown for Sixteen-layer robot-control PCB · manufacturer-published

Values apply to this specific published construction. Minimum drill size is not a confirmed finished-hole diameter; source-table differences are explained in the factory profile.

6 layers4 / 4 mil——

Shown for Six-layer one-step HDI rigid-flex · manufacturer-published

Specific adjacent official catalogue specification, inner/outer values retained separately; table limits not transferred. Hole field not defined finished.

How should I read the evidence?

UL ownership, equipment and material traceability are reviewed separately. Open each record for its source, scope and review date. Reviewed documents do not guarantee a particular board design or production outcome.

Do matching limits guarantee my board is manufacturable?

No. Layer, trace, drill and impedance values must match within one capability profile, but the combination still requires a factory DFM review. A dash means the value was not published and does not satisfy a numeric filter.