Pinsheng Electronics: PCB fabrication to assembly handoff

01 / SCOPE OF BUSINESS

A Shenzhen service profile, not one magic capability number.

The named company, 深圳市品升高精密电路有限公司, describes a service path from circuit design and PCB layout through fabrication, SMT, mechanical assembly and functional testing. Its PCB and SMT pages publish different technical tables. They should be compared as separate scopes when reviewing a mixed PCB/PCBA quote.

The website says it operates a production workshop and offers inspection equipment; this page does not convert those descriptions or the site's certificate imagery into independently verified certifications, equipment ownership or a specific UL file.

02 / BARE-BOARD SPECIFICATIONS

Ask for one feasible construction.

The manufacturer's PCB table spans 1–40 layers, 2/2 mil minimum line/space, 0.5–12 oz copper and 0.2–7 mm board thickness. These are separate rows; the site does not show that the extremes coexist on one board. The same table labels 0.15 mm as a minimum hole without identifying it as finished size.

LAYER RANGE1–40

LINE / SPACE MIN.2 / 2 mil

COPPER RANGE0.5–12 oz

If your job requires fine routing and heavy copper together, request a stack-up-specific DFM answer. The published 0.2 mm minimum thickness applies to the two-layer row; the minimum thickness rises with layer count in the same table.

Manufacturer-supplied product image. It does not document the combination of the published process extremes.

Check the complete PCB process table ↗

03 / PCB-TO-PCBA HANDOFF

The file package changes at assembly.

TO FABRICATE THE BOARD

Confirm the bare-board build

Pinsheng lists Gerber, DXF, PCBdoc and ODB++ among its accepted fabrication formats. Include the layer stack, finished dimensions, copper and surface finish, and identify any impedance or drilled-versus-finished-hole requirement.

TO ASSEMBLE AND TEST

Provide the assembly definition

Its SMT page separately asks for a BOM, placement/coordinate file, assembly drawing and a functional-test guide. Decide whether components are customer-supplied or procured, and who owns substitutions, programming and fixtures.

The quote should name the handoff

Parts responsibilityThe SMT page offers component procurement. Mark each BOM line as buyer-supplied or supplier-sourced, then set the rule for alternates and traceability documents.

Placement envelopeThe manufacturer's SMT table lists 01005 passive components and a PCB panel range from 6 × 6 to 500 × 500 mm. These are separate scope statements; submit your real panel, component list and placement drawing for review.

Release evidenceProvide a functional-test guide before pricing if you require FCT. Ask which first-article, AOI/SPI, X-ray, ICT or functional-test records will be delivered for the quoted batch.

Match the two acceptance records

The assembly page describes SPI/AOI and X-ray inspection as well as ICT and functional-test options. Ask which checks are included for your assembly, what evidence will be returned, and who handles a failed board or a component change. Do not assume every stated inspection is applied to every order.

04 / SOURCE TRAIL

Four original pages, separate scopes

Research checked on 7 October 2026. All process and assembly figures here are manufacturer-published; no independent certificate or site audit is claimed.

MANUFACTURER · COMPANYLegal name, services and workshop description ↗
MANUFACTURER · PCBFabrication process and layer-dependent thickness table ↗
MANUFACTURER · ASSEMBLYSMT process, file needs and test descriptions ↗
MANUFACTURER · PRODUCT IMAGEOfficial-site image origin ↗