What this manufacturer makes
Jitai Electronics manufactures flexible and rigid-flex printed circuits in Shenzhen. Its official profile dates the company to 2012. The process sheet has separate columns for flexible boards and rigid-flex, with maximum thickness varying by layer count. This listing uses the flexible-board column, including its eight-layer ceiling and working size. The separate ten-layer rigid-flex limit is excluded. Bend requirements, coverlay openings and reinforcement details should accompany the artwork rather than being inferred from the finished thickness alone.
Official company source reviewed- Manufacturing focus
- Flexible circuits · Rigid-flex boards · FPCA services
- Published footprint
- Guangdong
Flexible circuit — published FPC process range
Manufacturer reportedJitai Electronics lists flexible circuit — published FPC process range in its official manufacturing documentation. Maximum working size: 250 × 500 mm. Single-layer thickness: 0.036–0.15 mm. Double-layer thickness: 0.05–0.17 mm. Eight-layer thickness: 0.4–0.8 mm. Flexible-board column only. Thickness ranges are layer-specific; rigid-flex figures are separate. Which flex stack-up, stiffener arrangement and bend conditions are covered by the proposed manufacturing process?
Flexible-board column only. Thickness ranges are layer-specific; rigid-flex figures are separate.
- Layer count
- 1–8 layers
- Line / space
- —
- Finished hole
- —
- Impedance
- —
| Maximum working size | 250 × 500 mm |
|---|---|
| Single-layer thickness | 0.036–0.15 mm |
| Double-layer thickness | 0.05–0.17 mm |
| Eight-layer thickness | 0.4–0.8 mm |
| Aspect ratio | 5:1, source table |
| Technical source | jitaifpcb.com · Manufacturer specification |
Published limits may refer to different constructions. Confirm the complete stack-up with the factory. A dash means no value was published.
Sources & review record.
Reviewed 2026-09-21. Manufacturer pages can change; confirm the current revision when requesting a quotation.
- Jitai Electronics — product and technical documentationhttp://www.jitaifpcb.com/service.htmlSource checked 2026-09-21Official website
- Jitai Electronics — company informationhttp://www.jitaifpcb.com/about.htmlSource checked 2026-09-21Official website
- Jitai Electronics — company informationhttp://www.jitaifpcb.com/company-profile.htmlSource checked 2026-09-21Official website
- Jitai Electronics — company informationhttp://www.jitaifpcb.com/Source checked 2026-09-21Official website
Make the first technical conversation useful.
Which flex stack-up, stiffener arrangement and bend conditions are covered by the proposed manufacturing process?
Attach the manufacturing brief
Layer stack-up, finished dimensions, copper weights, laminate grade, quantity and delivery destination.
Define acceptance
Finished-hole tolerance, impedance targets, coupon requirements, surface finish and permitted process substitutions.
Confirm the recipient
Agree the manufacturing legal entity, confidentiality terms and approved site before sharing production files.